Glove manufacturers explain the types and functions of labor protection gloves

Labor protection gloves are labor protection gloves, which are made of animal leather and are not easy to be damaged. The long service life and fine processing make labor protection gloves favored by the majority of workers. Common labor protection gloves include insulating gloves, acid and alkali resistant gloves, welder gloves, anti vibration gloves, anti-static gloves, dust-free gloves, etc.

The use of labor protection gloves needs to be selected according to the size of the hand and the working environment. Pay attention to the corresponding inspection on them regularly when using them. If they are found damaged, they should be replaced in time.

Types and functions of labor protection gloves

1. Insulating gloves for live working

It refers to a kind of insulating gloves worn by operators for electrical insulation when working on live line on electrical equipment with AC voltage of 10kV and below (or DC electrical equipment with corresponding voltage level). The product model, external dimension and technical requirements shall comply with the provisions of the general technical conditions of insulating gloves for live work.

Gloves Bi must have good electrical insulation characteristics. At the same time, it also needs good tensile strength and elongation at break, as well as puncture resistance, aging resistance, fire resistance and low temperature resistance.

2. Acid and alkali resistant gloves

It is a protective product to prevent acid-base injury to hands, and its quality should meet the requirements of acid (alkali) resistant gloves. Gloves are not allowed to be frosted, brittle, sticky, damaged and other defects. Non leakage of gloves means that Bi must be air tight, and no air leakage is allowed under specific pressure.

This kind of gloves can be divided into rubber acid-base resistant gloves, latex acid-base resistant gloves, plastic acid-base resistant gloves, plastic acid-base resistant gloves, etc. according to the material. Waterproof gloves and gas-proof gloves can be replaced by acid-base resistant gloves.

3. Oil resistant gloves

These products are made of nitrile rubber, chloroprene or polyurethane to protect the hand skin from various skin diseases caused by the stimulation of oil substances, such as acute dermatitis, acne, folliculitis, dry skin, chapped skin, pigmentation and nail changes.

4. Welder gloves

Personal protective equipment to prevent high temperature, molten metal and sparks from burning hands during welding. It is made of cow, pig leather or two-layer leather, which can be divided into two finger type, three finger type and five finger type according to different finger types. Welder gloves have strict appearance requirements. A Ji product requires that the leather body be uniform in thickness, plump, soft and elastic, with fine, uniform and firm fluff on the leather surface, consistent in color, and no greasy feeling. Second grade: the leather body is lack of fullness and elasticity, the leather surface is thick, and the color is slightly dark.

5. Anti vibration gloves

It is used to prevent vibration induced occupational disease "white finger disease" when exposed to vibration, such as using hand-held vibration tools (such as chainsaws, rock drills, etc.) in forestry, mining, construction, transportation and other departments. The structure of anti vibration gloves is mainly to add a certain thickness of foam, latex and air interlayer on the palm to absorb vibration. The thicker the liner is, the more air it contains, and the better the damping effect is. However, when the palm and finger surfaces are too thick, it is easy to affect the operation.

6. Fire resistant and flame retardant gloves

The traditional fire-resistant and flame-retardant gloves are made of asbestos materials, which are divided into two finger and five finger types, and have three specifications: large, medium and small. Asbestos fiber is rarely used because it is irritating to human skin. Generally, fire-retardant canvas or other fire-retardant fabrics are used to make fire-retardant gloves, which are suitable for smelting furnace foremen or other furnace types of work.

7. Antistatic gloves

Fabric composition containing conductive fibers. The other is to weave gloves with long fiber elastic acrylic fiber, and then apply polyurethane resin on the palm, or polyurethane resin on the fingertip, or polyethylene coating on the surface of gloves.

Gloves containing conductive fibers quickly eliminate static electricity accumulated on hands. Gloves with polyurethane or polyethylene coating are mainly not easy to generate dust and static electricity. These products are mainly used for the assembly of weak current and Jing dense instruments, product inspection, electronic industry, printing, inspection work of various research institutions, etc.

8. Dust free gloves

It is processed from natural rubber, which can prevent the discharge of human finger tips in the production process. It can prevent the static electricity of human body from damaging the product in the production process. The product will not be polluted and affected by residues, oil stains, dust and sweat on the fingers in the production process, and the product will be effectively protected. PVC gloves are mostly used in clean rooms.

Precautions for the use of labor protection gloves

1. Before operation, Bi must remove all decorations that may affect the safety of operation.

2. If you choose gloves made of rubber, you should not let them contact with acid and other substances for a long time, and you should pay more attention not to let so sharp objects contact it.

3. No matter what kind of gloves you use, you should check them regularly. If you find any damage, you should take corresponding measures.

4. When working, put the cuffs of clothes into the unified mouth to prevent accidents.

5. Be careful not to let chemicals enter the gloves, otherwise it may cause failure to protect hands.

6. After use, it should be cleaned. After drying, it should be sprinkled with talc powder to prevent damage, but it should not be placed on the ground~

7. During transportation and storage, do not contact with oil acids and bases or other corrosive substances, and store them 1m away from the heat source in a dry and ventilated warehouse with a relative humidity of - 15 ° C ~ 30 ° C and 50 ~ 80%.

8. Bi has to retest its voltage withstand performance every 6 months, and the provision of light weight and multiple sizes has increased its flexibility; Textured surfaces help hold objects tightly; Cotton wool knitted inner lining, spacious cuffs give people working in a higher temperature environment more comfort.