The sander manufacturer explains how to use the sander?

Sanding machine is a woodworking instrument. Although it has sound protective equipment, accidents will also occur when the user operates improperly. Therefore, the operator should do a good job of pre job training before using the sanding machine, and operate the sanding machine according to the specifications to ensure the safety of personnel and property.

1. The use of sanding machine equipment should adopt the method of fixing personnel and posts. The operators should receive pre job training before taking the post, so as to be familiar with the performance of the equipment.

2. The equipment shall not be used after braking failure, and shall be reported to the equipment maintenance department for detection in time.

3. Operators should dress in a standard manner and avoid wearing clothes with hidden dangers.

The following points should be paid attention to before the operation of the sander:

1. The first thing to do before starting the sanding machine is to check whether there are obstacles between the sanding belt wheels, and if so, remove them in time.

2. Check whether the oil volume of the reducer is reasonable and check the power supply.

3. Turn on the main power supply, connect the air supply, and turn on the dust suction device.

4. Adjust the relaxation of the sand belt and set the air pressure.

5. Check the sharpness of the belt. If it is excessively worn, it needs to be replaced with a new belt before it is put into production.