Correct use of labor protection gloves

Labor protection gloves are used to protect our hands. Because its protective function determines that it is different from ordinary gloves. Different gloves have different protective effects and different places of use. If you use the wrong place and method, you will not have the corresponding protective effect of gloves, which is no different from other ordinary gloves. Because the protective characteristics are very important for it, we should pay attention to the following aspects when purchasing and using it:

1. Use in the right place with appropriate size: choose protective gloves suitable for different workplaces. The size of gloves should be appropriate. If the gloves are too tight, it will restrict blood circulation, which will easily cause fatigue and discomfort; If it is too loose and inflexible, it will easily fall off. In some workplaces, it is necessary to avoid the glove fingers being too long, being twisted or rolled by machinery, and causing hand injuries.

2. Select the corresponding protective function effect and replace it regularly: the protective gloves selected should have sufficient protective effect. The cutting resistant gloves of synthetic yarn cannot be selected in the environment where steel wire cutting resistant gloves should be selected. To ensure its protective function, gloves must be replaced regularly. If the service life is exceeded, hands or skin may be injured.

3. Check whether there is damage at any time: check the protective gloves regularly to see whether there are holes or damaged and abraded places, especially finger seams. The chemical resistant gloves can be checked by inflation method.

4. Pay attention to return after use: pay attention to safety during use, and do not throw away the contaminated labor protection gloves at will to avoid injury to others. Gloves that are not used for the time being should be placed in an all place.

5. Precautions for removal: pay attention to the correct method when removing the gloves of labor protection operation to prevent the harmful substances on the gloves from contacting the skin and clothes, causing secondary pollution.

6. Avoid sharing: Zui should not share protective gloves with others, because the inside of gloves is a hotbed for bacteria and microorganisms, and sharing gloves is easy to cause Cheng cross infection.

7. Pay attention to cleanliness: wash your hands before using protective gloves, and wear gloves on clean (sterile) hands, otherwise it is easy to breed bacteria. After taking off gloves, wash your hands and rub some hand cream to replenish grease.

8. Pay attention to the use time: when using vibration tools for operation, it cannot be considered that wearing anti vibration gloves is enough. Pay attention to arrange a certain time to rest during work. With the increase of the vibration frequency of the tool itself, the rest time can be extended accordingly. For all kinds of vibration tools used, Zui can easily measure the vibration acceleration, so as to select appropriate anti vibration gloves and achieve better protection effect.

Safety without trifles

Take self-protection measures

Choose the right protective equipment

Always pay attention to safety

Ensure safety at all times